ARCTIC

Sort By:  
Ring Blade Design (RBD) : Interconnecting fan blades designed for a reinforced and rigid structure, eliminating vibration for stable and fluid fan operation.
HKD 160.00
ARCTIC P12 Max Cooling Fan / Ring Blade Design (P12 Max)


   

Extremely Wide Speed Range


Building up on the success of the P12 PWM, the P12 Max extends the controllable speed to an impressively wide range from 200 RPM up to 3300 RPM. This enables a quiet operation when low airflow is needed and also an unprecedented level of performance on heatsinks and radiators. The P12 Max provides a significant performance boost to existing air and water cooling solutions.


  

Maximum Performance - Without Compromises


The P12 Max delivers focused airflow and high static pressure, making it suitable for all scenarios. The fan is optimised for use on radiators, heat sinks, pinholes and mesh. Therefore, the P12 Max is the ideal fan for enthusiasts and professionals who are looking for maximum performance with a long service life.


  

0 dB Mode - Zero RPM


The fan speed can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Thus, the P12 Max allows an incomparably dynamic adjustment of the speed, so that the airflow can be perfectly regulated for every case.


  

Improved Stability


The P12 Max features a closed fan wheel design. The advantage of this fan wheel combination is a pressure stability without compromise. In scenarios with high pressure resistances and higher speeds, the force effect is distributed uniformly over the entire fan wheel and enables low-vibration rotation while maintaining high static pressure.


  

Maximum Smoothness, Minimum Vibration


Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. The rubber pads mounted at the corners additionally dampen the residual vibrations caused by the higher revolutions.


  

Designed for Continuous Operation


The premium quality of the dual ball bearing allows 24/7 continuous operation without compromising performance. Contamination and high temperatures affect this bearing much less than ordinary sleeve or ball bearings. Therefore, the dual ball bearing is the perfect choice if you want to ensure continuous operation at maximum speed. Please note that ball bearings have a physically higher bearing noise compared to conventional sleeve bearings.

Specifications

ARCTIC P12 Max Cooler Master
Mobius 120 OC
Cooler Master
Mobius 120P ARGB
Noctua
NF-A12x25 PWM
Ring Blade Design
(RBD)
Yes Yes Yes No
Fan Speed (RPM) 200 ~ 3300 ± 5% L: 0 ~ 1500 ± 200
M: 0 ~ 2400 ± 250
H: 0 ~ 3200 ± 10%
0 ~ 2400 ± 10% 450 ~ 2000 ± 10%
L.N.A.: 450 ~ 1700 ± 10%
Air Flow (CFM) 81.04 L: 42.2
M: 65.5
H: 88.1
75.2 CFM 60
L.N.A.: 49.7
Static Pressure
(mm H₂O)
4.35 L: 1.19
M: 2.76
H: 4.75
3.63 2.34
L.N.A.: 1.65
Noise Level
dB(A)
20.63
35 ~ 50 dB
(1540~3330rpm)*
L: 17.4
M: 31.1
H: 39.3
41.8 ~ 61.8 dB
(1000 ~ 3000rpm) *
30 22.6
L.N.A.: 18.8
PWM Yes Yes Yes Yes
Fan Bearing Dual Ball Bearing Dual Ball Bearing Loop Dynamic Bearing SSO2
Current / Voltage 0.29A / 12V 0.5A / 12V 0.18A / 12V 0.14A / 12V
Weight 184g 214g 179g -
Warranty 6 Years Lifetime 5 Years 6 Years
ARGB No No Yes No
* Third party test
Ring Blade Design (RBD) : Interconnecting fan blades designed for a reinforced and rigid structure, eliminating vibration for stable and fluid fan operation.
HKD 160.00
Per Page      1 - 1 of 1
  • 1